SAND ANIMAL FENCE

LME's animal fencing system is mainly used as an anti-intrusion barrier against farm and other animals. The most common use is on highways, where vast distances are covered at a very economical cost. Animal fencing can also be used to enclose areas such as farms, forest areas and national parks, where security is not critical. This system is easy to install and can be erected in a comparatively short-time.

FENCING: 2.14Meter HIGH

13 rows of 3.15mm diameter wire in conformity with BS4102.
Intermediate Posts:
Made from 50 x 50 x 3.2mm thick SHS, with a total length of 2.80 meters (3.14 meters above ground and 0.66 meters buried in concrete) with centers placed at intervals of every 7.50 meters.
Straining Posts:
Made from 100 x 50 x 3.2mm thick RHS, with a total length of 2.80 meters (2.14 meters above ground and further 0.66 meters buried in concrete with four supporting struts made from 50 x 50 x 3.0mm thick SHS, with centres placed at intervals of every 300 meters, These are fitted wtih all necessary accessories such as rathet winders, hollow bolts and nuts and turn buckle.
Corner Posts:
Placed at corner or change in direction positions. Construction of posts is the same as straining posts, but with four support strut.
Straining Posts:
Made from 100 x 50 x 3.2mm thick RHS, with a total length of 2.80 meters (2.14 meters above ground and further 0.66 meters buried in concrete with four supporting struts made from 50 x 50 x 3.0mm thick SHS, with centres placed at intervals of every 300 meters, These are fitted wtih all necessary accessories such as rathet winders, hollow bolts and nuts and turn buckle.
End Posts:
End posts are used either at the end of fencing or at its start position. Construction is the same as for straining posts, but with only two support strut.
Hair-Pin Staples:
All Wires should be hair-pinned to line posts with staples.
Dropper Bars:
Dropper bars are placed to secure line wires in position and are 0.82 meters in length.

FENCING: 1.90Meter HIGH

13 rows of 3.15mm diameter wire in conformity with BS4102.
Intermediate Posts:
Made from 50 x 50 x 3.2mm thick SHS, with a total length of 2.80 meters (3.14 meters above ground and 0.66 meters buried in concrete) with centers placed at intervals of every 7.50 meters.
Straining Posts:
Made from 100 x 50 x 3.2mm thick RHS, with a total length of 2.80 meters (2.14 meters above ground and further 0.66 meters buried in concrete with four supporting struts made from 50 x 50 x 3.0mm thick SHS, with centres placed at intervals of every 300 meters, These are fitted wtih all necessary accessories such as rathet winders, hollow bolts and nuts and turn buckle.
Corner Posts:
Placed at corner or change in direction positions. Construction of posts is the same as straining posts, but with four support strut.
Straining Posts:
Made from 100 x 50 x 3.2mm thick RHS, with a total length of 2.80 meters (2.14 meters above ground and further 0.66 meters buried in concrete with four supporting struts made from 50 x 50 x 3.0mm thick SHS, with centres placed at intervals of every 300 meters, These are fitted wtih all necessary accessories such as rathet winders, hollow bolts and nuts and turn buckle.
End Posts:
End posts are used either at the end of fencing or at its start position. Construction is the same as for straining posts, but with only two support strut.
Hair-Pin Staples:
All Wires should be hair-pinned to line posts with staples.
Dropper Bars:
Dropper bars are placed to secure line wires in position and are 0.82 meters in length.